Sheets & Plates
Also known as: MS plate, Steel sheet, GI sheet, Chadar
OR Steels supplies Sheets & Plates in ASTM A36, SS400, S275 / S355, DX51D (GI) — sizes Thickness 0.4 – 100 mm, Widths 1000 / 1250 / 1500 / 2000 mm, Lengths 2000 – 6000 mm. Mill test certificate with every lot. Shearing, plasma / gas cutting to drawings. Delivered from Karachi across Pakistan.
Hot-rolled and cold-rolled flat products including MS plates, chequered plates, GP/GI sheets and PPGI coils. Available in standard sizes or cut-to-length, with flatness and thickness held to mill tolerances.
At a glance
- Standards
- ASTM A36, SS400, S275 / S355, DX51D (GI)
- Sizes
- Thickness 0.4 – 100 mm · Widths 1000 / 1250 / 1500 / 2000 mm · Lengths 2000 – 6000 mm
- Price basis
- Quoted per tonne or per sheet on request
- Certificates
- Mill test certificate with every lot
- Processing
- Shearing, plasma / gas cutting to drawings
- Delivery
- Karachi by own fleet; nationwide via vetted carriers
- Lead time
- Confirmed in your quote
- Minimum order
- Confirmed in your quote
Prices are quoted on request because steel prices move with the market. Minimum order, lead time and price validity are stated on your quote.
Grades
- ASTM A36
- SS400
- S275 / S355
- DX51D (GI)
Sizes
- Thickness 0.4 – 100 mm
- Widths 1000 / 1250 / 1500 / 2000 mm
- Lengths 2000 – 6000 mm
Specifications
| Forms | Plate, sheet, coil, chequered |
|---|---|
| Coatings | GI (Z120 – Z275), PPGI, Galvalume |
| Certification | Mill certificate & heat number |
| Processing | Shearing, plasma / gas cutting |
Typical applications
- Tanks & vessels
- Roofing & cladding
- Machine bodies
- Flooring & walkways
Certification & traceability
Every lot of Sheets & Plates ships with its mill test certificate and heat number, and material is checked against the certificate before dispatch. Need the certificate for a specific lot? Use the button above and we will include it with your quote.
Sheets & Plates: common questions
What is the difference between HR and CR sheet?
Hot-rolled (HR) sheet is rolled at high temperature, has a scaled surface and looser tolerances, and is used for structural and heavy fabrication. Cold-rolled (CR) sheet is finished at room temperature with a smooth surface and tighter thickness tolerance for panels and visible work.
What do Z120 and Z275 mean on GI sheet?
They are zinc coating designations: the total coating mass on both faces in grams per square metre. Z275 carries more zinc than Z120 and is the usual choice for roofing and exposed cladding.
What thicknesses and sizes do you stock?
From 0.4 mm sheet up to 100 mm plate, in widths of 1000, 1250, 1500 and 2000 mm and lengths of 2000–6000 mm, with shearing and plasma / gas cutting to your drawings.
Do sheets and plates come with a mill test certificate?
Yes. Every lot of sheets and plates is supplied with the mill test certificate and heat number. Use the "Request mill test certificate" button on this page to ask for the certificate with your quote.
How do I get a price for sheets and plates?
Send the grade, sizes, quantity and delivery location through the quote form. Prices are quoted on request and we reply usually within a few hours on business days; minimum order quantity and lead time are confirmed in your quote.
Guides for Sheets & Plates
- Quality guideHow to Read a Mill Test Certificate (MTC)A mill test certificate (MTC) is the steel mill's record of one heat of steel: its chemical composition and its tested mechanical properties against a named standard. Check that the heat number on the certificate matches the tag on your material and that every value meets the standard's minimum.
- Buying guideSteel Suppliers in Pakistan: Mills vs StockistsPakistan's steel supply chain has three layers: mills that roll rebar and some sections from scrap and billets, importers that bring in structural sections, plate, coil and pipe through Karachi port, and stockists that sell mixed lots with processing and delivery. Buy by standard and grade, insist on a mill test certificate, and choose the layer that matches your quantity and timeline.
You may also need
ReinforcementTMT Rebars
Grade 60 & 40 deformed bars with high ductility and consistent ribs.
StructuralStructural Sections
I-beams, H-beams, channels and angles for frames and heavy structures.
TubularPipes & Tubes
ERW, seamless and galvanized pipes; square & rectangular hollow sections.